Fridge Filter Compatible with GE GXRLQR GXSTQR FQSLF FQSV FQROPF FQK2J

Refrigerator Water Filter Compatible Models

Refrigerator	Compatible with Water Filter Models
GE	GXRLQR(used in the refrigerator/ icemaker Inline Water Filter System. Such as: GXRLQ, GX1S50F, GXIS50F, GX1550F, GQ1S50F, GQIS50F, GQ1550FOB1, WR97X215 )
GE	GXSTQR(used in the GE GXSTQ Inline Water Filter System)
GE	FQSLF, FQSVF (used in the GXSV65F & GQSV65F filter system)
GE	FQROPF(used in the water filter system. Such as GEPNRQ15, GEPNRQ15F, GEPNRQ15FBL, GEPNRQ20, GEPNRQ20F, GEPNRQ20FWW, GEPNRQ21LBN, GEPNRQ21LRB, GEPXRQ15, GEPXRQ15F)
GE	FQK2J (used in the Water Filter System. Such as GXSL55, GQSL55R, GXSL55F, GQSL55F, GXJ285JBL, GXK295JNN, GXSL55R, GXSV65R, GNSV70RBL)

Basic Parameters

Model NO	RWF3700A
Unit/Case	40Units
Case Weight	29.9pounds
Case Dimension	19.1" x 12.2" x 9.8"
Cases/Pallet	32Cases   (Based on 39.4”x39.4”, or 43.3”x43.3” pallet)
Pallet Weight	990pounds
Pallet Dimension	43.7”x 43.7”x  44.5”
Individual Filter Dimension	OD: 2.1"    Length: 8.5"
Individual Unit Weight With Box	11.1oz
Individual Unit Box  Dimension	2.3" x 2.3" x 8.7"
OPERATING TEMP	34-100℉
OPERATING PRESSURE	30-120psi
FLOW RATE	0.5-1 GPM
FILTRATION LIFE:	6 months/1500G(Depends on water quality and level of contaminants)

Advantages 
● NSF42 Certified by WQA.
●  Remove Chlorine, color, odor, Voc, THM’s, etc.           Chlorine Reduction Rate tested by WQA is 99.06%
●  Remove Pesticides and Herbicides.  Tested by the third-party lab according to NSF53.    
   √ Lindane Reduction Rate>95%       
   √ Atrazine Reduction Rate>85%
   √ 2.4-D Reduction Rate >86%          
   √ Toxaphene Reduction Rate>90%
●  Heavy Metal Reduction tested by SGS according to NSF53 standard.    
    √ Arsenic Reduction Rate > 87.8%    
    √  Mercury Reduction Rate> 99%         
    √ Cadmium Reduction Rate>  97.2    
    √  Lead Reduction Rate>99%                 
    √ Copper Reduction Rate>96.1          
    √  Chromium Reduction rate>96.9%
●  Particulates (Class I)  Reduction Rate    
     √  >99.0%      Tested by the third-party lab according   to NSF53 standard. 
Installation Instruction
 1. Turn off the icemaker.
 2. Remove the filter canister from the manifold by rotating the canister to the left about 1/3 turn.
 3. Install the new filter canister into the manifold by turning it to the right about 1/3 turn until the alignment marks line up and the filter stops. DO NOT over tighten.The filter will raise up as it is turned.
 4. Cycle the water dispenser or run optional valve for 4 gallons (flush approximately 5 minutes) to flush out any harmless carbon fines that may be present.
 5. Turn on the icemaker.