Fridge Water Filter Replacement for GE MSWF; KENMORE 9914 46-9914

Refrigerator Water Filter Compatible Models

Basic Parameters

Certifications 
● NSF42 Certified by WQA.
●  Remove Chlorine, color, odor, Voc, THM’s, etc.           Chlorine Reduction Rate tested by WQA is 99.06%
●  Remove Pesticides and Herbicides.  Tested by the third-party lab according to NSF53.    
   √ Lindane Reduction Rate>95%       
   √ Atrazine Reduction Rate>85%
   √ 2.4-D Reduction Rate >86%          
   √ Toxaphene Reduction Rate>90%
●  Heavy Metal Reduction tested by SGS according to NSF53 standard.    
    √ Arsenic Reduction Rate > 87.8%    
    √  Mercury Reduction Rate> 99%         
    √ Cadmium Reduction Rate>  97.2    
    √  Lead Reduction Rate>99%                 
    √ Copper Reduction Rate>96.1          
    √  Chromium Reduction rate>96.9%
●  Particulates (Class I)  Reduction Rate    
     √  >99.0%      Tested by the third-party lab according   to NSF53 standard. 

Installation Instruction
 1. On models without a replacement indicator light, apply the month sticker to the new cartridge and mark your calendar to remind you to replace the filter after six months.
 2. Remove the old filter cartridge by grasping and slowly rotating to the left(counterclockwise).
3. Position the new cartridge inside the cartridge holder and slowly rotate the cartridge to the right (clockwise) until it stops. The cartridge will rotate about a 1/2 turn.  Do not over tighten.
4. Run water from the dispenser for 6-8 minutes (about 3-4 gallons) to clear the system and prevent sputtering.
5. Press and hold the RESET WATER FILTER BUTTON if your fridge has one.