This article is the installation instructions for the refrigerator water filter Liebherr 7440000. You can follow the instructions to install your new refrigerator water filter. You should ensure that the filter housing is not damaged before installation.
1. On models without a replacement indicator light, apply the month sticker to the new cartridge and mark your calendar to remind you to replace the filter after six months.
2. Remove old filter by turning it counter-clockwise. Pull the old filter cartridge out.
3. Remove the protective cap from the end of the new cartridge.
4. Insert the new filter into the filter head.
5. Turn the cartridge clockwise until it clicks it into place
6. Run water from the dispenser for 6-8 minutes (about 3-4 gallons) to clear the system and prevent sputtering.
7. On models with a replacement indicator light, press and hold the RESET WATER FILTER PAD on the dispenser.
Ultrafiltration (UF) is a membrane filtration process similar to Reverse Osmosis...
You know the water goes to a purification station at the edge of town. You drive...
If you’re looking to choose a water filter system supplier, this article will he...
Installing a whole house water system can solve a wide range of problems affecti...
A whole house water filter might be advisable to provide your household with cle...
With a whole house water filter, you'll get the same quality filtered water at t...
China Biggest Water Filters & Cartridges Manufacturer
So there is no problem in after sale service. And we are still looking for local factories in other countries, to unfolding depth of cooperation.
links
