Before installation, please make sure that the outer surface of the Whirlpool refrigerator water filter 4396508, 4396510 you purchased is not damaged.
Installation instructions for Whirlpool refrigerator water filter 4396508, 4396510.
1. On models without a replacement indicator light, apply the month sticker to the new cartridge and mark your calendar to remind you to replace the filter after six months.
2. Remove old filter by rotating cap about 1/4 turn counter-clockwise. Pull the old filter cartridge out.
3. Remove the cartridge grille cap by sliding it off the end of the old cartridge.
4. Slide the cartridge grille cap onto the new cartridge.
5. With the new cartridge cap in the vertical position, insert the new filter cartridge into the base grille.
6. Rotate the cap clockwise to a horizontal position.
7. Run water from the dispenser for 6-8minutes(about 3-4 gallons) to clear the system and prevent sputtering.
9. On models with a replacement indicator light, press and hold the RESET WATER FILTER PAD on the dispenser.
Make sure that you are actually bought the water filter model 4396508, 4396510, which you can confirm according to the label of the filter housing. If not, you may need to exchange or purchase a new one.
You want to install a ro system like everyone else. But before installing, you n...
This article is the installation instructions for the refrigerator water filter ...
You want to know cheap water filtration suppliers in order to make more money. C...
Fortunately, you have installed a whole house water filter that will allow you a...
After the water is filtered, you will be more at ease. With water filtration, yo...
You know that the Reverse Osmosis System is a water purifier, but do you underst...
links
