Water Filters & Cartridges Manufacturer
NSF 53&42 Certified Refrigerator Water Filter, Compatible with Maytag UKF8001, UKF8001AXX-200, Whirlpool 4396395, KITCHENAID 67003526
RWF0900A(Structure B)
MAYTAG, WHIRLPOOL, KITCHENAID
6 months
NSF42, NSF53
Available
May you like
Refrigerator Water Filter Compatible Codes
|
Refrigerator |
Water Filter Models |
|
MAYTAG |
UKF8001, UKF-8001P, UKF8001AXX, 67003523; UKF9001, UKF9001AXX |
|
WHIRLPOOL |
4396395 |
|
KITCHENAID |
67003526, 67003591, 67003727, 67003527, 67003528, 12589203, 12589206, 12589208, 12589210; |
|
KENMORE |
46-9006, 469006, 46 9006, 9006, 46 9992 |
|
EveryDrop |
EDR4RXD1 |
|
AQUA FRESH |
WF295 |
|
SWIFT GREEN |
SGF-M10 |
Advantage of Water Filter for Refrigerator
● NSF 53 CERTIFIED: Reduces specific health-related contaminants for cleaner water: 99.6% of Lead, 99.99% of Cyst, 96.6% of Benzene, 98.4% of Carbofuran, 96.6% of Endrin
● NSF 42 CERTIFIED: Reduces 97% of Chlorine, taste and odor for great-tasting water that stimulates your palate
● NSF 372 CERTIFIED: Made of lead-free material for worry-free drinking experience
Basic Parameters of Fridge Water Filter
|
Unit/Case |
40 Units |
|
Case Weight |
29.5 pounds |
|
Case Dimension |
21.7"x 13.6" x 9.6" |
|
Cases/Pallet |
40Cases (Based on 39.4" x39.4" , or 43.3" x43.3" pallet) |
|
Pallet Weight |
913pounds |
|
Pallet Dimension |
43.7" x 43.7" x 54.3" |
|
Individual Filter Dimension |
OD: 2.3" Length: 7.8" |
|
Individual Unit Weight |
11.2oz |
|
Individual Unit Box Dimension |
2.5" x 2.5" x 8.2" |
|
OPERATING TEMP |
34-100℉ |
|
OPERATING PRESSURE |
30-120psi |
|
FLOW RATE |
0.5-1 GPM |
|
FILTRATION LIFE |
6 months/1500G |
Installation Instruction
1). On models without a replacement indicator light, apply the month sticker to the new cartridge and mark your calendar to remind you to replace the filter after six months
2). Remove old filter cartridge by grasping and gently turning counterclockwise a 1/4 turn until it releases from the filter head
3). Remove the protective foil from the end of the new filter. Fill the replacement filter with a little water from the tap to allow for better flow immediately after installation
4). Insert new filter into filter head and rotate clockwise until the filter stops
5). Close the filter cover.
6). Run water from the dispenser for 6-8 minutes (about 3-4 gallons) to clear the system and prevent sputtering
7). On models with a replacement indicator light, press and hold the RESET WATER FILTER PAD on the dispenser.
Leave a message
Welcome to visit our website. If there is anything we can do for you, please contact with the online service or leave your message here. We will reply you as soon as possible.
links
