Wholesale Fridge Filter Compatible with LG LT700P

Refrigerator Water Filter Compatible Codes

Basic Parameters

Certifications 
● NSF42 Certified by WQA.
●  Remove Chlorine, color, odor, Voc, THM’s, etc.           Chlorine Reduction Rate tested by WQA is 99.06%
●  Remove Pesticides and Herbicides.  Tested by the third-party lab according to NSF53.    
   √ Lindane Reduction Rate>95%       
   √ Atrazine Reduction Rate>85%
   √ 2.4-D Reduction Rate >86%          
   √ Toxaphene Reduction Rate>90%
●  Heavy Metal Reduction tested by SGS according to NSF53 standard.    
    √ Arsenic Reduction Rate > 87.8%    
    √  Mercury Reduction Rate> 99%         
    √ Cadmium Reduction Rate>  97.2    
    √  Lead Reduction Rate>99%                 
    √ Copper Reduction Rate>96.1          
    √  Chromium Reduction rate>96.9%
●  Particulates (Class I)  Reduction Rate    
     √  >99.0%      Tested by the third-party lab according   to NSF53 standard. 
Installation  Instruction
 1. On models without a replacement indicator light, apply the month sticker to the new cartridge and mark your calendar to remind you to replace the filter after six months.
 2. Press the push button to open the filter cover.
 3. Pull the old cartridge upward to remove and discard.
 4. With the new cartridge in the horizontal position, push the cartridge into the manifold hold until it stops.
 5. Remove the protective cap from the end of the new cartridge.
 6. Push the filter cover downward until it clicks into place.
 7. Run water from the dispenser for 6-8 minutes (about 3-4 gallons) to clear the system and prevent sputtering.
 8. On models with a replacement indicator light, press and hold the RESET WATER FILTER PAD on the dispenser .