10 x 4.5 Inch Big Blue PP Spun Melt Blown Water Filter Cartridge with Low Price
Model: PP10BB
Key Feature
10 Inch big blue polypropylene water filter, the micron is controlled. Removing efficiency can reach 99%. 0.5, 1, 5, 10, 25, 50, 75, 100, 150, 200 Micron.
Inquiry Now
May you like
•Food Grade Material
Materials are FDA listed as acceptable for potable and edible; Available in a wide selection of micron rating from 0.5µm to 200µm.
•Absorption Characteristics
1. The gradient structure design, the inner dense, to filter tiny particles, the outer loose, to filter the larger impurity particles.
2. Using 100% pure polypropylene as raw materials, adding no cooling masterbatch, oxidant, calcium powder.
•Structure Characteristics
1. Glossy ,needled , press lined , embossed are available.
2. End cap and core are available.
3. The gradient structure design.
4. Size adjustable, length from 3 to 60 inch,OD from 30 to 180mm.
•The filter has three Layers. Micron rate differs from outside to inside. Outer layer is 10 micron. Middle layer is 5 micron. Inner layer is 1 micron. By this way, the filter not only has bigger dirty capacity, but also assure the filtration effects.
|
Model NO |
PP10BB |
|
Material |
Fresh Polypropylene |
|
Specification |
Length:10" OD:4.5" ID:1.1, 1.2 |
|
Micron Rate |
0.5, 1, 5, 10, 25, 50, 75, 100, 150, 200 Micron |
|
Working TEMP. |
39-126℉/4-52℃ |
|
Max. Operating Pressure |
100psi |
|
Max. Flow |
5GPM(1.5-2kg/c㎡) |
|
QTY(pcs/CTN) |
10 |
|
Carton Size |
22.8"×9.4"×20.5"/58cm×24cm×52cm |
Request a quote
Welcome to visit our website. If there is anything we can do for you, please contact with the online service or leave your message here. We will reply you as soon as possible.
